AEconversion AEDL-UH Logger The AEconversion data logger can monitor up to 50 inverters and stores all operational data for up to 2 years. The polling intervals can be adjusted individually in the range from 1 minute to 60 minutes. The collected and stored data are: current performance, current income, status. The display is on a 2x16-character LC-display with back light. In addition to the direct reading of the data on the display, the stored data can be copied to a USB memory stick for graphical representation using the monitoring software. Eine Produktübersicht erhalten Sie hier. Schnittstellen: RS485 PLC USB Speicher Eingänge: Nom. AC Spannung: 230 VAC Nom. AC Spannungsbereich: 184 - 264 VAC AC Strom: 25 mA AC Frequenz: 50 / 60 Hz Max. Strom: 16 A Gehäuse: Abmessungen (L / B / H): 100 / 65 / 90 Gewicht: 0,3 kg Schutzklasse: IP 20    

SMA Energy Meter Universal recording of measured values for intelligent energy Management The powerful measurement solution for intelligent energy management within the SMA Smart Home: The SMA Energy Meter takes phase-exact and balanced electrical measured values as a grid feed-in and purchased electricity meter and communicates these values via Speedwire. Thanks to its ability to quickly acquire measured values, the SMA Energy Meter is the ideal supplier of data for intelligent energy management within the SMA Smart Home. All PV generation data, purchased electricity and grid feed-in can be transmitted via standard Ethernet cable to the Sunny Home Manager, for example, or to the Sunny Boy Smart Energy. This, in turn, facilitates optimal energy monitoring, effective load and battery management and reliable active power limitation at the grid feed-in point while taking self-consumption into account. Easy-to-Use     Quick plug and play installation     Graphic visualization of current measured values in Sunny Portal Flexible     Space-saving top-hat rail mounting in household distribution thanks to compact enclosure     Use of standard Ethernet cables for Speedwire communication     Universal deployment options regardless of existing energy meter     Easily and flexibly combined with SMA Smart Home components High Performance     Fast three-phase reading of measured values for effective energy management    Fast Speedwire communication  

SMA Home Manager 2.0 The control center for smart energy management Everything’s in position for efficiently using solar energy. The Sunny Home Manager 2.0 offers all functions for seamless PV system monitoring, smart energy management and an integrated energy management solution, the SMA Smart Home. As a result, PV system operators have an overview of all relevant energy flows in the home. Using the individualized recommended actions, they can make decisions about when to use their solar power best. In particular, the Sunny Home Manager 2.0 is key to automated integration of controllable loads and also serves as energy manager in storage systems with the Sunny Boy Smart Energy or Sunny Island. System monitoring with the Sunny Home Manager 2.0 Every residential PV system can be conveniently and seamlessly monitored with the Sunny Home Manager 2.0. After a simple commissioning procedure using the installation wizard, all basic functions are available via Sunny Portal. The PV system operator can use the live display to quickly get updated on energy home management. The data is updated every ten seconds, thereby playing a key role in helping to secure yield from the PV plant. In this process, the energy values for PV generation, purchased electricity and grid feed-in are registered from the connected power meters via various interfaces.     Transparency for all household energy flows     Free of cost PV system monitoring secures ideal yield from the PV plant     Easy commissioning thanks to installation wizard     Immediate e-mail notification in the event of a failure     Power and energy values instantly visible with live display     Display of battery charging and discharging Energy management with the Sunny Home Manager 2.0 Energy management in the SMA Smart Home is not a static and pre-defined process, instead the Sunny Home Manager 2.0 looks around and thinks for itself. For example, it uses the local weather forecast to calculate how much solar power is expected to be available over the course of the day. Even more, the Sunny Home Manager 2.0 learns the typical time at which household appliances are operated (load profile) and takes this into account in its calculation for energy management. The result: Thanks to the recommended actions provided, system operators receive guidance when and for how long they can use the solar power — optimally. For example, to start the washing machine. Thanks to this unique service, PV plants with Sunny Home Manager 2.0 reach a higher level of self-consumption, which is specifically important in Germany. Furthermore, time-of-use electricity tariffs are considered, the system is well prepared for future changes of the electricity supply conditions.     Individualized recommended actions result in optimized use of solar power     Support in reducing energy costs by precisely understanding household energy flows     Higher yields and a quicker return on investment through increase of self-consumption rate     Up to ten percent lower power consumption while optimizing your self-consumption rate     Storage system battery is charged at the ideal time Load control with SMA Smart Home The Sunny Home Manager 2.0 integrates controllable loads fully in accordance with the PV system operator’s individual requirements. Specifically, this means that common household appliances, such as washing machines or dishwashers, can be switched on or off remotely. This takes places either via the SMA radio-controlled socket for usual appliances or via data connection (Ethernet) for Smart appliances, i.e. for heat pumps from Stiebel Eltron, Tecalor or other white ware from Miele.This not only further increases self-consumption, but also helps users to record the specific load profiles of individual appliances, thereby helping them to identify electricity guzzlers.     Increase of self-consumption rate through automated load management     High convenience: Controllable loads are automatically turned on at just the right moment     Transparency: Electricity guzzlers can be identified through suitable visualisation of power measurement data     Detailed display of the energy mix comprising solar energy, battery power and purchased electricity  

Studer Communication module Xcom-232i The communication module Xcom-232i, equiped with a serial port RS-232, enables to be informed of the state of a system consisting of one or several Xtenders, VarioTracks or VarioStrings. It is then possible to read all data that can be displayed on the remote control basic screen and also to modify the configuration parameters. An Xtender, VarioTrack or VarioString system can therefore be connected to various SCADA control and supervision devices (PC, programmable logic controller, microcontroller). From a more technical point of view, the electrical interface RS-232 allows for instance the data transmission with GSM modems, RS-232 bridges to TCP/IP or also with long distance converters RS-422. Besides, in order to secure a total electrical separation between the Xtender, VarioTrack or VarioString system and the control and supervision device, the port is protected by means of a galvanic isolation. The module Xcom-232i is also having a function of data recording and analyzing (Data logger function).

Studer Xcom-CAN Kommunikationsmodul Multi-Protokoll-Kommunikations-Satz für Xtender- und Vario-Systeme Dieses Tool ermöglicht die Kommunikation zwischen dem BMS, Lithium Batterie Management System, und den Produkten der Familie Xtender/VarioTrack/VarioString. Die Liste mit den zugelassenen Batterien (Hersteller) ist auf Anfrage bei Studer Innotec erhältlich. Mit der Xcom-CAN ist es auch möglich mit anderen CAN-BUS Geräten (PC, programmierbarer Automat, Mikroprozessor) und allen Xtender/Vario Produkten über ein proprietäres Protokoll zu interagieren. Zum Beispiel kann ein System über ein SCADA gesteuert werden und bietet somit Zugriff auf Systemdaten, Parametereinstellungen und gespeicherte Logdaten.

Studer Xcom-GSM Internet based communication sets Xtender, VarioTrack and VarioString systems can now be constantly controlled from any remote terminal, computer, tablet or smartphone. The communication sets Xcom-GSM and Xcom-LAN allow connecting to sites with GSM mobile coverage or with internet-connection over a local network.     Studer Innotec provides this «plug-and-play» solution using a secure server and a simple and user-friendly interface.  The interface allows for remote interaction with the installation exactly as if on-site with the remote control RCC-02/-03, including: access to all parameters, real-time display of measured data of all devices included in the system and access to the last 30 days of log files. Furthermore this solution makes it possible to consult the system’s event log at any time. It also allow users to configure alarm messages to be sent to one or more persons by e-mail or SMS. Any loss of internet connection can be indicated.  Xcom-LAN or Xcom-GSM? Studer Innotec offers two different communication sets for providing access to the installation via internet. The available means of communication at the location of the installation will determine which set to choose. If the installation has access to internet through a local area network (LAN), choose the Xcom-LAN set. If there is no available connection to the internet but access to a GPRS or 3G mobile network*, choose the Xcom-GSM set.  * the compatibility should always be verified with the mobile phone network operator

Studer Xcom-LAN Internet based communication sets Xtender, VarioTrack and VarioString systems can now be constantly controlled from any remote terminal, computer, tablet or smartphone. The communication sets Xcom-GSM and Xcom-LAN allow connecting to sites with GSM mobile coverage or with internet-connection over a local network.     Studer Innotec provides this «plug-and-play» solution using a secure server and a simple and user-friendly interface.  The interface allows for remote interaction with the installation exactly as if on-site with the remote control RCC-02/-03, including: access to all parameters, real-time display of measured data of all devices included in the system and access to the last 30 days of log files. Furthermore this solution makes it possible to consult the system’s event log at any time. It also allow users to configure alarm messages to be sent to one or more persons by e-mail or SMS. Any loss of internet connection can be indicated.  Xcom-LAN or Xcom-GSM? Studer Innotec offers two different communication sets for providing access to the installation via internet. The available means of communication at the location of the installation will determine which set to choose. If the installation has access to internet through a local area network (LAN), choose the Xcom-LAN set. If there is no available connection to the internet but access to a GPRS or 3G mobile network*, choose the Xcom-GSM set.  * the compatibility should always be verified with the mobile phone network operator